[magick-users] Re: Wrapping an actual picture frame with only a corner piece

[Fred Weinhaus]

As Anthony pointed out, the shading on the inner side of the black in 
the corner piece is not symmetric between the right side and the 
bottom side. You need a better corner that is symmetric. Otherwise, 
you need to have all four corners with the correct lighting effect 
that you want, typically lighting from the top left to properly shade 
all edges of the frame once composited together.


>Basically there is very little detail (dark) on the top and the bottom of
>the frame. The commands I'm using to generate this are as follows: